Outdoor Hunting Gear: Introduction to and Characteristics of Blow Molding
Product Examples: Bionic Turkey, Bionic Blue-winged Teal, Bionic Deer
I. Blow Molding Process (Outdoor Hunting Gear)
1. Plastic extrusion: HDPE plastic pellets are heated until molten, and extruded into tubular parisons;
2. Mold Clamping: The split mold clamps the sagging, high-temperature green body;
3. Blow molding: Compressed air is fed through the blow nozzle to inflate the parison and press it against the inner wall of the mold, forming a hollow shell in one piece;
4. Cooling and Trimming: The mold is cooled with water to set the shape, and the flash caused by closing the mold is trimmed off;
5. Secondary Processing (as needed)
6. Surface Treatment: Matte finish, olive drab spray coating, and UV-resistant treatment, making it suitable for use in the wilderness, forests, and environments exposed to intense sunlight.
II. Key Features of Blow-Molded Hunting and Outdoor Gear
1. One-piece, hollow, seamless shell; lightweight
The one-piece molded hollow structure has no welded seams and is significantly lighter than rotomolded cases of the same volume, making it easier to carry while hiking, on your back, or in a vehicle; the hollow structure provides built-in cushioning, offering elastic energy-absorbing protection in the event of a fall.
2. Withstands harsh outdoor conditions
The HDPE substrate is resistant to low temperatures, rain, moisture, and saline-alkali soil. With the addition of a UV-resistant formula, it resists aging and brittleness even after prolonged exposure to sunlight in mountainous and forested areas; it is rust-resistant and can withstand minor bumps and scrapes. Its matte, wear-resistant surface minimizes glare and reduces visibility (meeting the need for concealment in the wild).
3. Mass production costs are manageable, making it suitable for high-volume production
Blow molding requires a lower initial investment than injection molding or rotomolding, offers faster production speeds, and is well-suited for the mass production of ammunition boxes, outdoor storage containers, and training accessories, making it an exceptionally cost-effective solution.
4. Can be constructed with a double-layer insulation structure
Similar to the logic behind the previous insulated box, the double-walled chamber can be filled with PU foam and used to store bait, keep game fresh, or store accessories at low temperatures.
5. Basic Water- and Dust-Resistance
The case itself is watertight, and when equipped with a rubber gasket and a pressure-balancing vent valve, it provides basic dust and water protection, making it suitable for storing accessories and consumables in outdoor environments with rain and snow.
Contact Us at Any Time