I. Introduction to the Blow Molding Process for Insulated Boxes
Insulated coolers are primarily manufactured using extrusion blow molding (EBM), a type of blow molding process. This is currently the most common molding method for commercial cold chain and outdoor insulated coolers. The raw material is typically HDPE (high-density polyethylene), though some products use PP or LLDPE.
Applicable Scenarios:Ideal for fresh food delivery, fishing coolers, takeout food insulation, short-distance pharmaceutical cold chain transport, and small-to-medium-sized coolers for camping
II. Manufacturing Process and Product Characteristics
1. The housing is formed as a single, seamless piece
The outer shell and inner liner are molded as a single piece, with no seams, ensuring excellent structural integrity and resistance to water leakage; it is also stronger than models made from separate injection-molded parts that are assembled.
2. High production efficiency, suitable for high-volume production
With short molding cycles and a high degree of automation, this process is well-suited for the mass production of insulated boxes for food delivery and the pharmaceutical cold chain; mold costs are lower than those for injection molds, and the initial investment is moderate.
3. Relatively light weight
Lighter than rotomolded boxes while offering the same rigidity, making them easier for riders and delivery personnel to carry; ideal for short-distance food delivery and fresh produce delivery.
4. The insulation layer is dense
PU foam is directly injected into the space between the two layers of the shell, resulting in a dense, void-free fill that provides stable thermal insulation performance.
5. Resistance to high and low temperatures; food safety
HDPE is cold- and heat-resistant, food-safe, and offers some impact resistance. It has a smooth surface that is easy to clean and can be modified to be UV-resistant for outdoor use.
6. Controllable wall thickness
High-end models are equipped with a servo-controlled blank wall thickness control system, which can optimize wall thickness by adding material to edges, corners, and stress-bearing areas, thereby reducing stress cracking.
III. Complete Blow Molding Process for Insulated Boxes:
1. Plastic extrusion: Plastic pellets are heated and melted inside an extruder to form a tubular, hollow parison;
2. Mold Closure: The split mold clamps the sagging hot preform;
3. Blow molding: Compressed air is fed through the blow pin into the preform, inflating the hot plastic so that it conforms to the inner wall of the mold, forming a single-piece, double-walled shell (the outer shell and inner liner are integrated, with a cavity left in the middle);
4. Cooling and demolding: The mold is water-cooled to set the shape, and flash is trimmed;
5. Foam filling: Inject PU (polyurethane) foam into the cavity between the two layers of the shell; once cured, it forms a thermal insulation layer;
6. Final Assembly: Install accessories such as O-rings, handles, drain plugs, and snap fasteners, and inspect the finished product.
Note: Injection blow molding is used in a few cases, primarily for small, precision insulated containers; large insulated boxes are almost exclusively made using extrusion blow molding.
Contact Us at Any Time